Fire Protection Engineer

This vacancy is for a GS-0804-13, Fire Protection Engineer located in the Department of Homeland Security, U.S. Coast Guard, SILC ENGINEERING SERVICES DIVISION in NORFOLK, Virginia.

Major duties
You will serve as a/an Fire Protection Engineer and be responsible for performing fire protection design reviews for SILC field units (Civil Engineering Units and Facilities Design & Construction Center) and Product Lines. Being a Coast Guard civilian makes you a valuable member of the Coast Guard team. Typical work assignments include: Managing the complete lifecycle of fire protection systems for a nation-wide portfolio of shore facilities, overseeing all aspects of design, modification, and configuration control. Managing the complete inspection and analysis cycle for all fire protection systems, guaranteeing adherence to code, maintenance standards, and operational protocols. Managing the project scoping process by directing the analysis of all reports, drawings, and specifications to ensure alignment with applicable codes. Managing the end-to-end design of fire protection systems, from initial planning to final implementation, guaranteeing adherence to all applicable international, federal, and state standards. Managing the technical and strategic guidance provided to project managers and leadership, defining project needs, scopes of work, levels of effort, resources, and constraints to ensure successful outcomes. Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments, based on your adjudication decision. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement. To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments. Reasonable Accommodation Information

Qualifications
Basic Requirements: This position has a positive Education Requirement in addition to at least one year of Specialized Experience or substitution of education for experience or combination (if applicable) in order to be found minimally qualified. Transcripts must be submitted with your application package. You MUST meet the following requirements: EDUCATION: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. You MUST provide transcripts. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure – Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. You MUST provide transcripts.2. Written Test – Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3. Specified academic courses – Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. You MUST provide transcripts.4. Related curriculum – Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. You MUST provide transcripts.AND To qualify at the GS-13 grade level, your resume must demonstrate at least one (1) full year of specialized experience equivalent to at least the GS-12 grade level in the federal sector. Specialized experience is experience that has equipped you with the ability, skill, and knowledge to successfully perform the duties of this position and is typically in or related to this line of work. Examples of specialized experience must include performing the following types of tasks on a regular basis. Experience analyzing and inspecting fire protection systems for code compliance, proper maintenance, and operation. Experience analyzing reports, drawings, and specifications to define project scope consistent with applicable codes. Experience designing fire protection systems following adopted international, federal, and state standards using various software and tools. Experience providing technical advice to project managers, designers, and leadership, including project needs, scopes of work, levels of efforts, resources and constraint. Experience providing full-scope fire protection oversight for a geographically dispersed portfolio, including leading system design projects, managing modifications, and ensuring strict configuration control. NOTE: All experience statements (i.e., duties, specialized experience, or related applicable assessment) copied from this announcement and pasted into your resume will not be considered as a demonstration of your qualifications for this position.NOTE: Education cannot be substituted for experience at this grade level.National Service Experience (i.e., volunteer experience): Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

How to apply
Only resumes up to a total of two pages will be accepted. Font size should not be smaller than 10pts & margins no smaller than .5 inches. Applicants with resumes exceeding two pages will be removed from consideration. To begin your online application, click "Apply Online" to create a USAJOBS account and follow the prompts or log in to your existing account. Your application packet must include a resume, any applicable assessments, and any applicable and/or required supporting documentation. Please see the "Required Documents" section for additional information. All application materials, including transcripts, must be in English. We encourage you to apply online. Applications and supporting documentation will not be accepted by mail or email. The address below is for inquiries only. You may apply more than once, but the most recent application is the only one that will be used. You must submit your resume, and any supporting documents by 11:59 PM EST on 09/30/2026. USA Hire Assessment – If you are required to complete any USA Hire Assessments, you will be notified after submitting your application. The notification will be provided in your application submission screen and via email. The notification will include your unique assessment access link to the USA Hire system and the completion deadline. Additionally, in USAJOBS you can click "Track this application" to return to your assessment completion notice. Access USA Hire using your unique assessment link. Access is granted through your USAJOBS login credentials. Review all instructions prior to beginning your assessments. You will have the opportunity to request a testing accommodation before beginning the assessments should you have a disability covered under the Rehabilitation Act of 1973 as amended. Set aside about 2 hrs to take the USA Hire Assessments; however, most applicants complete the assessments in less time. If you need to stop the assessments and continue later, you can re-use your unique assessment link. Your responses to the USA Hire Assessments will be reused for one year (in most cases) from the date you complete an assessment. If future applications you submit require completion of the same assessments, your responses will be automatically reused. Visit the USA Hire Applicant Resource Center for practice assessments and assessment preparation resources at https://support-usahire.opm.gov/hc/en-us. It is your responsibility to verify that any information entered or uploaded is received and is accurate. Human Resources will not modify or change any part of your application. Determining your eligibility and qualifications is dependent on the supporting documentation and information provided, which may impact your referral for further consideration. If a document is not legible, we will not be able to consider it as part of your application. To verify the status of your application, log into your USAJOBS account (https://www.usajobs.gov), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/. If claiming eligibility under the VOW Act: The VOW Act requires Federal agencies to treat active duty service member as veterans, disabled veterans, and preference eligibles, when they submit, at the time they apply for a Federal job, a "certification" of active service in lieu of a DD214. In order to be considered under the VOW Act, the certification must specify that the service member is expected to be discharged or released from active duty under honorable conditions not later than 120 days after the date the certification is submitted with your application package for this job announcement. The certification must be on letterhead from the appropriate military branch and include the following information: military dates of service and expected discharge or release date, character of service, military rank, type of discharge, and date when terminal leave will begin. Certifications must be signed by, or by direction of military members' military personnel offices, unit commanders or higher headquarters. Agencies are required to verify a qualifying separation from military service prior to appointment, through the DD214 or other appropriate documentation. Your preference and/or appointment eligibility will be verified prior to appointment.